External solar shading installed on a modern building façade to reduce overheating and improve energy efficiency.

TM59 overheating assessment is typically used to assess overheating risk for new residential homes (Part O context), while TM52 thermal comfort assessment is commonly used to evaluate overheating risk in non‑domestic spaces. Both rely on dynamic thermal modelling. The most important decision is timing—early assessment protects massing, glazing, shading and ventilation decisions.

Overheating assessment in plain English

Overheating assessment tests whether indoor temperatures are likely to exceed comfort thresholds in warm weather. The goal is to catch risk early and apply design mitigations before late-stage changes become expensive.

What TM59 overheating assessment is used for

TM59 overheating assessment is widely used in the UK for residential overheating risk assessment using dynamic thermal modelling and residential occupancy profiles.

  • Most commonly used for new residential schemes.
  • Sensitive to glazing, shading, ventilation, orientation and weather files.
  • Outputs help justify design mitigations early.

What TM52 thermal comfort assessment is used for

TM52 thermal comfort assessment is used to assess overheating risk in non‑domestic spaces (e.g., offices, education) with criteria focused on adaptive comfort and exceedance thresholds.

  • Common in commercial / public buildings.
  • Strong interaction with ventilation strategy and internal gains.
  • Often linked to operational outcomes.

What changes the result the most

The biggest levers are usually solar control, ventilation strategy, internal gains, and how early you assess.

  • External shading / g-values.
  • Window opening strategy and constraints (e.g., noise).
  • Mechanical ventilation / cooling assumptions.
  • Internal gains from people and equipment.

Insights from the Field

When TM59 overheating assessment is done after façade is locked, mitigation options narrow quickly. Early modelling often reduces the need for complex or costly measures later.

How this typically bundles with other services

Overheating assessment

SAP calculations

SBEM calculations

Daylight and sunlight assessment

Ventilation design

FAQ

It depends on building type and use. Start with an overheating assessment scoping call and we’ll confirm the right route.

Often associated with Building Regulations, but earlier assessment can be valuable where design risk is high or planning conditions pull performance forward.

Early massing, glazing ratios, ventilation concept, occupancy assumptions and context are usually enough to scope the first run.

For TM59/TM52 methodologies, dynamic modelling is typically required.

Yes—shading, glazing specification, ventilation strategy, layout and internal gains are typical levers.

Yes—UK-wide.

Source

https://www.gov.uk/government/publications/overheating-approved-document-o, https://www.cibse.org/